Advantanges of silica fume for warehouses For the requirements of warehouse such as logistics and storage center, the most critical solution is to resist the problems of forklift rolling and anti-wheel friction, and at the same time try to improve the decoration of the floor to achieve a durable...Send Inquiry
Advantanges of silica fume for warehouses
For the requirements of warehouse such as logistics and storage center, the most critical solution is to resist the problems of forklift rolling and anti-wheel friction, and at the same time try to improve the decoration of the floor to achieve a durable and beautiful effect. According to the new construction or renovation projects of warehouses,adding silica fume and other addititves to concrete to form an economical and practical wear-resistant floor.
The advantages for using silica fume for warehouses are as follows:
(1) Its greatest advantage is its high wear resistance, which can increase the wear resistance of concrete floors by 225%;
(2) The high density wear-resistant surface layer formed on the surface of the floor is strong in impact resistance, and can not produce dust, peeling, etc.;
(3) Integral with the concrete ground, will not fall off;
(4) Convenient construction, economical cost, low maintenance cost;
(5) The service life can generally reach 25 years or more.
Technicial datas for silica fume for warehouses
|Increased strength||When the blending amount is 5-10%, the compressive strength of the crucible can be increased by 10-30%, and the bending strength can be increased by more than 10%.|
|Increased Density||When blended with 10%, impermeability is increased by 5-8 times, and resistance to carbonization is increased by more than 4 times.|
|Increased frost resistance||After blending with 10% microsilica, the relative dynamic elastic modulus decreased by 1-2% after 300-500 cycles of freeze-thaw cycles, while after 25-50 cycles, the rhodium was reduced. The elastic modulus has been reduced by 36-73%.|
|Increased early strength||The R1 compressive strength of the control group increased by 30% and R3 increased by 40-50%.|
|Increased anti-abrasion and anti-cavitation resistance||Micro-silica fume is 0.5-2.5 times more resistant than conventional antimony, and 3-16 times more resistant to cavitation erosion. It is the best material for repairing and protecting the surface of hydropower stations, reservoirs and dams.|
What to be noted when adding silica fume for warehouse?
(1) when adding silica fume for warehouses, it must be used in combination with a superplasticizer to obtain good results.
(2) when adding silica fume for warehouses,the silica fume should not be too high or too low.
(3) when adding silica fume for warehouses, the concrete slump should be 2~3cm larger than that of ordinary concrete.
Should you have any interest in our silica fume for warehouses, welcome to contact us. With over 8 years experience in this field, our factory pays high attention to quality. Please rest assured to buy. Low price, fast delivery and excellent service are offered.